Branchline Water Tank
Steam locos must have water, and the local water tank provided for their needs. This is a freelanced model of an unsophisticated 20,000-gallon tank based upon several different prototype tanks. The height is about normal for use with narrow gauge, but it will work well for smaller standard gauge locomotives. If a bit of extra height is needed, the ground under the tank can be raised.
This kit consists of laser-cut basswood, plywood, styrene, detail castings, and the tabbed, well-engineered construction that provides easy assembly. A sheet of laser-cut, see-through ‘water’ is included! The footprint is about 18’ x 22’.
East End Grocery
Boot Repair Shop
A B & C Hardware
Miss Catherine's - Ladies' Finery
Rickett's Lumber Yard
Turner's Machine Shop
Return to B.T.S.
Return to "BTS Structures"
Page created by Bill Wade, Web Architect, Wade Publishing
Last Changed on: July 9, 2009
© 1997-2009 -- All Rights Reserved